32 SEBU8121
Operation Section
Engine Starting
i01903609
After Starting Engine
Note: In temper
atures from 0 to 60°C (32 to 140°F),
the warm-up time is approximately three minutes. In
temperatures below 0°C (32°F), additional warm-up
time may be req
uired.
When the engine idles during warm-up, observe the
following con
ditions:
•
Check for any fluid or for any air leaks at idle rpm
and at one-ha
lf full rpm (no load on the engine)
before operating the engine under load. This is not
possible in some applications.
•
Operate the engine at low idle until all systems
achieve operating temperatures. Check all gauges
during the w
arm-up period.
Note: Gauge readings should be observed and
thedatasho
uld be recorded frequently while the
engine is operating. Comparing the data over time
will help to determine normal readings for each
gauge. Comp
aringdataovertimewillalsohelp
detect abnormal operating developments. Significant
changes in the readings should be investigated.
To Next Page
Loading...
