Perkins 4012 - Lubrication System; Engine Fixing Bolts; Air Starter; Instrument Panel (Engine Mounted)

1
14 User’s Handbook, TSL 4186E, Issue 2
4012/16 Diesel
Lubrication system
Exhaust system
Flywheel and flywheel housing
Engine fixing bolts
Air starter
Instrument panel (engine mounted)
Engine model 4012 4016
Recommended oil See "Lubricating oil recommendations" on page 58
Type of system Wet sump, external engine mounted oil pump
Total oil capacity (including cooler and filter) 178 litres (39.2 gal) 238 litres (53 gal)
Sump capacity (dipstick)
Minimum 136 litres (30 gal) 147 litres (33 gal)
Maximum 159 litres (35 gal) 214 litres (47 gal)
Crankcase pressure (maximum) 25 mm (1”) water gauge
Lubricating oil temperature maximum to bearings 105 °C
Lubricating oil pressure at 80 °C temp. to bearings 0,34 mPa
Maximum oil temperature in sump 115 °C
Minimum oil pressure (1500 rpm) (at filter head) 200 kPa (30 lb/in
2
)
Oil filter Disposable canister type
Oil pump location ‘A’ Bank
Engine model 4012 4016
Manifold type Dry or water cooled
Exhaust outlet flange Vertical (twin)
Mating flange See Installation Manual
Engine model 4012 4016
Flywheel SAE 18” (SAE 21” Optional)
Flywheel housing - SAE size “0”
Engine model 4012 4016
Hole dia. (engine feet) 22 mm
No. off 8
Hole dia. (radiator feet) 18 mm x 6 4012TAG 22 mm x 6 4016TAG/2
Turbochargers
22 mm x 6 4012TAG2
22 mm x 6 4012TWG/1
Engine model 4012 4016
Air starter See Installation Manual
Air starter pressure 150 lb/in
2
(10.34 bar)
Compressed air supply 170 lb/in
2
(11.72 bar)
Engine model Normal Operation
Oil pressure Between 276-413 kPa (40-60 lb/in
2
)
Oil temperature Between 80-90 °C (176-194 °F)
Water temperature Between 65-85 °C (149-185 °F)