4
34 User’s Handbook, TSL 4186E, Issue 2
4012/16 Diesel
Service schedule (prime and baseload rated engines)
Note: The following service schedules have been developed for engines using the standard oil filtration
system.
The procedures indicated in the service schedule require reference to the following publications:
z User’s Handbook - TSL 4186E (UH)
z Workshop Manual - TSL 4165E (WM)
A Service - First 100 hours
B Service - Every 250 hours
C Service - Every 2500 hours
Description Manual
Oil and filter - change UH
Fuel filter - change UH
Equalise bridge pieces and set valve clearance UH
Fan and battery charging alternator taperlock drive pulleys - check UH
Fan and battery charging alternator drive belts - check UH
Description Manual
Oil and filter - change (oil sampling recommended) UH
Fuel filter - change UH
Equalise bridge pieces, set valve clearance and check valve seat recession UH
Breather systems - clean or replace element UH
Air filter - replace (subject to environmental conditions) UH
Governor actuator - lubricate ball joints WM
Fan and battery charging alternator drive belts - check UH
Description Manual
Oil and filter - change (oil sampling recommended) UH
Fuel filter - change UH
Equalise bridge pieces, set valve clearance and check valve seat recession UH
Breather systems - clean or replace element, also replace valves on closed circuit system UH
Air filter - replace (subject to environmental conditions) UH
Fan and battery charging alternator drive belts - check UH
Coolant mixture - check UH
Magnetic pickup in flywheel housing - clean and set WM