Required Service Tools
Table 1
Required Service Tools
Part Number Description
T400077 Extraction Tool
T400078 Extraction Tool
T400079 Extraction Tool
T400080 Extraction Tool
T400081 Extraction Tool
-
Suitable Digital Multimeter
Optional Service Tools
Table 2 lists the optional service tools that can be
used when the engine is serviced.
Table 2
Part Number Description
U5MK1092
Spoon Probe Kit
MULTIMETER
-
or
-
Suitable Digital Pressure Indicator
or
Engine Pressure Group
-
Suitable Battery Load Tester
-
Suitable Temperature Adapter
MULTIMETER
2900A038 Harness as
Perkins Electronic Service Tool
The Electronic Service Tool can display the following
information:
• Status of all pressure sensors and temperature
sensors
• Programmable parameter settings
• Active diagnostic codes and logged diagnostic
codes
• Logged events
• Histograms
The Electronic Service Tool can also be used to
perform the following functions:
• Diagnostic tests
• Calibrations
• Programming of flash file
• Parameter programming
• Copy configuration function for Electronic Control
Module (ECM) replacement
• Data logging
• Graphs (real time)
Table 3 lists the service tools that are required in
order to use the Electronic Service Tool.
Table 3
Service Tools for the Use of the Electronic Service
Tool
Part Number Description
-
(1)
Single Use Program License
-
(1)
Data Subscription for All Engines
27610164
27610401
TIPSS Adapter Kit (Electronic Service Tool to the
ECM interface)
or
Perkins CA3 Kit
(1)
Refer to Perkins Engine Company Limited.
Note: For more information on the Electronic Service
Tool and the PC requirements, refer to the
documentation that accompanies the software for the
Electronic Service Tool.
UENR0612
7
Introduction
This document has been printed from SPI2. NOT FOR RESALE
To Next Page
Loading...
