EasyManua.ls Logo

Perkins 904J-E36TA - Page 34

Perkins 904J-E36TA
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
i07943897
Product Description
904J-E36TA Industrial Engine
The Perkins 904J-E36TA industrial engine is a single
turbocharged, air to air charge cooled engine with an
engine prefix of FW.
The engine aftertreatment system is configured:
Diesel Oxidation Catalyst (DOC)
Diesel Particulate Filter (DPF)
The Perkins 904J-E36TA industrial engine is a single
turbocharged, air to air charge cooled engine with an
engine prefix of FX.
The engine aftertreatment system is configured:
Diesel Oxidation Catalyst (DOC)
Diesel Particulate Filter (DPF)
Selective Catalytic Reduction (SCR)
904J-E28T and 904J-E28TA
Industrial Engines
The Prkins 904J-E28T and 904J-E28TA industrial
engines are single turbocharged engine. The engine
may be turbocharged or turbocharged with an air
charge cooler.
The engine aftertreatment system is configured as
follows:
Diesel Oxidation Catalyst (DOC)
Diesel Particulate Filter (DPF)
Engine Specifications
The configuration will depend on the power output of
the engine.
Note: The front end of the engine is opposite the
flywheel end of the engine. The left and the right
sides of the engine are determined from the flywheel
end. The number 1 cylinder is the front cylinder.
Illustration 30 g06297997
Typical example
(A) Inlet valves
(B) Exhaust valves
Table 1
904J-E36TA and Engine Specifications
Operating Range (rpm)
800 to 2400
(1)
Number of Cylinders
4 In-Line
Bore 98 mm (3.86 inch)
Stroke 120 mm (4.72 inch)
Power (Model FW) 55.4 kW (74.29 hp)
Power (Model FX)
70 to 100 kW
(93.87 to 134.1 hp)
Aspiration Turbocharged charge cooled
Compression Ratio
17:1
Displacement 3.62 L (220.97 cubic inch)
Firing Order
1-3 -4-2
Valves per cylinder
4
Rotation (flywheel end)
Counterclockwise
(1)
The operating rpm depends on the engine rating, the applica-
tion, and the configuration of the throttle.
Table 2
904J-E28T and 904J-E28TA Engine Specifications
Operating Range (rpm)
800 to 2400
(1)
Number of Cylinders
4 In-Line
Bore 90 mm (3.54 inch)
Stroke 110 mm (4.33 inch)
Power rating
50 kW to 55.4 kW
(67.05 hp to 74.29 hp)
(continued)
34 M0092609-05
Product Information Section
Product Description

Table of Contents

Related product manuals