11
Upload / Download (Using Permaconn 4G or IP)
Panel Client Software (PCS) is a virtual modem application that enables remote access to the
alarm panels using wireless 4G or Ethernet connec-
tion.
If using Serial Data as a monitoring path:
Connect the panel’s dialler to the PM54 to allow for
upload / download (PCS) capability, an example of
this is the Tecom & Concept panels
Note: Disable fax machine defeat and call back.
Enable one (1) call to answer, three (3) rings
Panel Software
Tecom V8 & V10 Titan v3.02+ / Forcefield v6.4+ / Titan CT
NX4 / 16 / 128 Reliance DL900 v4.01+ / DLX900
DL150 / 250 / 300 DASLOAD v6.0
Solution 844 / 16 / 880 A-Link Plus v4.12+
Solution 16i / 16 Plus / 64 Solution Link v1.2.3+
Solution 6000 Solution Link v2.1.1+
Solution 2000 & 3000 A-Link Plus v5.00+
DSC PC4020 / PC1616 DLS2002
DSC PC1616 + PC1864 DLS-5 (v4.2)
Crow Runner 8 / 16 ULD16 (v2.0.0.1+)
Paradox MG-5050 & EVO-192 Winload (v5.50+)
Ness D8 NessComms (v5.6.0.0+)
Risco LightSYS Config Software (v2.1+)
MCM Icon8 MCM Connect v5.45
Concept 3000 & 4000 Insight Installer (v5.4.10) & Wdirect 6.0+
Digiflex Vision 16 / 64 Vision Link
Protege' LE Protege' SE
Texecom Wintex
PM54 Installation Manual v1 RDCCO_2195_E_IN
Monitoring
Up/Dn
PCS
List of compatible panels and software
PM54
Alarm
Panel
To Next Page
Loading...
Need help?
General
