Warnings and Safety Regulations
27
Preparing the vehicles:
1 Remove any jewelry that may come in contact with the battery terminals.
2 Select a jumper cable that is long enough to attach to both vehicles in a way that
ensures neither vehicle touches each other.
3 Position the two vehicles together, but do not allow them to touch.
4 Turn OFF all lights, heater, radio, and any other accessory on both vehicles.
5 Set the parking brakes: pull out the Yellow button located on the dash.
6 Shift the transmission into park position or neutral for manual transmissions.
(See “Shifting Gears” on page 130 and “PARKING BRAKE AND SERVICE
BRAKE” on page 125, for transmission shifting and parking brake information.)
7 If either vehicle is equipped with battery disconnects ensure they are in the
"OFF" position prior to connecting the two vehicles.
To Next Page
Loading...
