Transport, packaging and storage
5 Transport, packaging and storage
5.01 Transport to the customer’s premises
Within Germany, machines with a table are delivered without packaging. Machines without
a table (sewing head only) and machines which are to be exported are packaged.
5.02 Transport within the customer’s premises
The manufacturer bears no liability for transport within the customer’s premises or to the
individual locations of use. Make sure that the machines are always transported upright.
5.03 Disposal of the packaging
The packaging of these machines consists of paper, cardboard and VCE fiber. The proper
disposal of the packaging is the responsibility of the customer.
5.04 Storage
The machine can be stored for up to 6 months if not in use. During this time it should be
protected from dust and moisture.
For longer storage the individual parts of the machine, especially the moving parts, must be
protected from corrosion, e.g. by a film of oil.
5 - 1
To Next Page
Loading...
