Pfaff 1051

Adjustment
11 - 25
● Switch on the edge trimmer and bring the needle bar to t.d.c. or b.d.c. (see
requirement).requirement).
requirement).requirement).
requirement).
● Turn eccentric 1 (two screws 2) according to the
requirementrequirement
requirementrequirement
requirement.
11.06.02 Cutting motion
Requirement
With the edge trimmer switched on and the needle bar at its t.d.c. on the PFAFF 1053 and
1183, or at its b.d.c. on the PFAFF 1051 and 1181, the knife should be at the top of its
stroke.
1
2
Fig. 11 - 24