Sewing
10 - 1
10 Sewing (only on machines with Quick-flange motor)
In the sewing mode all relevant settings for the sewing operation are displayed. Functions
can be switched on or off by pressing a key. Values for start and end backtacks or stitch
placement can be changed directly.
When the machine is switched on, the sewing mode is always activated.
ABCD
3333
● If necessary switch off the function "darning seam" or "counted seam", see Chapter 10.01
Darning program or Chapter 10.02 Counted seam.
Functions in manual sewing, also see Chapter 7.09.02 Function keys:
Start backtacks on/off Presser foot raised at end of seam on/off
End backtacks on/off Thread trimming on/off
Needle position raised on/off Darning program on/off
Presser foot raised on/off Counted seam on/off
Sewing is carried out with the pedal functions, see Chapter 7.03 Pedal..
The "Darning program" and "Counted seam" functions are explained in more
detail in Chapter 10.01 Darning program or Chapter 10.02 Counted seam.
● Switch on the machine.
To Next Page
Loading...
Need help?
General
