Sewing
10 - 2
10.01 Darning program
The corresponding function can be switched on or off directly with the Darning program
key. The "counted seam" function is switched off automatically. Several darning programs
with different seam sections A and/or B can be selected. The number of required darning
programs can be selected by operating the +/- key 1. The number of stitches for the individu-
al seam sections A and/or B can be selected by operating the corresponding +/- key. By
operating the corresponding +/- key it is possible to select a repeating factor "C" for the
selected darning program.
If the backtack functions are also activated, only the status backtack on or backtack off is
displayed. The individual backtack parameters can be altered after the "darning program"
function has been switched off, see Chapter 9.08 Entering start and end backtacks.
10.02 Counted seam
The corresponding function can be switched on or off directly with the Counted seam key.
The "darning program" function is switched off automatically. Several counted seam sections
can be selected. The number of required seam sections can be selected by operating the
+/- key 1. The required number of stitches"A" of the selected seam section can be selected
by operating the corresponding +/- key.
If the backtack functions are also activated, only the status backtack on or backtack off is
displayed. The individual backtack parameters can be altered after the "counted seam"
function has been switched off, see Chapter 9.08 Entering start and end backtacks.
ABC
15 15 5 1
1
A
160 1
1
To Next Page
Loading...
Need help?
General
