Adjustment
12 - 45
1 101 Control panel key tone A, B, C ON
(0FF = AUS, ON = EIN)
6 605 Speed display B, C OFF
(0FF = AUS, ON = EIN)
607 Max. speed B, C 300 - 6000 4500
609 Cutting speed B, C 60 - 500 180
660 Bobbin thread control A, B, C 0 - 2 0
0 = off
1 = thread monitor
2 = reverse counter
7 700 Needle position 0 B, C 0 - 255
(needle reference position)
702 Needle position 1 (needle lowered) B, C 0 - 255 70
703 Needle position 2 (take-up lever raised) B, C 0 - 255 222
705 Needle position 5 (end of cutting signal 1) B, C 0 - 255 196
706 Needle position 6 (start of cutting signal 2) B, C 0 - 255 136
707 Needle position 9 B, C 0 - 255 150
(start thread tension release)
797 Hardware test B, C OFF
(0FF = AUS, ON = EIN)
798 User level A, B, C 0, 1, 11 0
0 = User level "A"
1 = Mechanic level "B"
11 = Service level "C"
799 Machine class C 1 - 2 1
1 = 918 / 938
2 = -
8 800 Rotating direction of the motor C 0 - 1 1
1 = 918 / 938
12.08.03 List of parameters
Group
Parameter
Setting
range
Set value
User level
Description
Further parameters are listed in the Motor Instruction Manual.
To Next Page
Loading...
Need help?
General
