Adjustment
24
Fig. 1 - 18
2
1
1
.05.18 Lubrication
Requirement
After a running time of 10 seconds a thin fi lm of oil should be visible on paper strip 1
when this is held over the hook.
● Check that the machine is fi lled with oil and that the oil lines are free of air.
● Run the machine for 2 – 3 min.
Do not put your hands into the needle area when the machine is running!
Danger of injury from moving parts!
● With the machine running, hold paper strip 1 against the hook and check the require-
ment.
● If necessary, regulate amount of oil with screw 2.
www.promelectroavtomat.ru
To Next Page
Loading...
Need help?
General
