Pfaff Powerline 2545 Adjusiment Manual

Adjustment
31
1.06.04 Bobbin thread clamp spring
Requirement
When the thread trimmer is in its cutting position, the clamp spring should slightly touch
the thread catcher and hold the thread reliably.
● Adjust clamp spring 1 (screw 2) in accordance with the requirement.
● Carry out the cutting operation by hand and check the setting. Readjust if necessary.
Fig. 1 - 25
1
2
www.promelectroavtomat.ru

Pfaff Powerline 2545 Specifications

General

Brand	Pfaff
Model	Powerline 2545
Category	Sewing Machine
Language	English