19Operate your sewing machine
Presser foot lifter
The presser foot is raised or lowered with
the presser foot lifter (15).
Changing the presser foot
Removing the presser foot
Switch off the main switch (1)
Position the needle at its highest point.
Press the presser foot upwards at the front
and down at the back at the same time so
that it disengages from the presser foot
holder (25).
Engaging the presser foot
Place the presser foot under the presser
foot holder (25) so that when the presser
foot lifter (15) is lowered, the pins of the
foot engage in the presser foot holder.
Check: Please check that the presser foot is
properly engaged by raising the presser foot
lifter.
To Next Page
Loading...
