23
20
19
A
19
Operate your sewing machine
Reverse sewing
The machine sews in reverse only as
long as the reverse sewing button (20) is
pressed.
Stitch length adjustment
dial
Adjust stitch length
With the stitch length adjustment dial (19)
you can adjust the stitch length between
0 and 6 mm by turning the point marking
on the button to the required length.
Buttonhole
Between the numbers 0 and 1 you will
À nd the “buttonhole” symbol (A). This
area is the optimum stitch density for
sewing buttonholes and embroidering.
The further you turn the dial to 0, the
higher the density of the stitch.
Stretch stitches
To sew stretch stitches (dark background),
you must turn the stitch length
adjustment dial (19) as far as it will go in
the grey area.
To Next Page
Loading...
