42 Maintenance and trouble-shooting
Machine does not feed or feeds irregularly
Sewing lint has collected between the feed
dog teeth rows.
Remove needle plate, remove lint with
brush.
Feed dogs are lowered, slide C (see page
21) at right.
Push slide C (see page 21) to left.
Machine is running with difÀ culty
There are thread remnants in the hook
race.
Remove the threads.
Important note!
Before you replace sewing feet or needles, you must switch off the main switch.
Do not start the threaded machine without fabric in it.
If you leave the machine, even for a short time, do not forget to switch off the main
switch. This is important if children are nearby.
To Next Page
Loading...
Need help?
General
