EN – 45
ENMaintenance
Recommended tools
The tools required for disassembling and reassembling the motor pump
asssembly are listed below:
• N° 3 and N° 9 flat screwdrivers
• Thin spanner
- All models: 12 - 13 - 16 - 17 mm on face
- C1: 14 - 16 - 50 mm on face
- C2: 14 - 16 - 19 mm on face
• Allen wrenches: 2 - 4 - 5 - 6 - 8 mm
• 8mm extraction screws
• Filter cartridge key - automobile equipment supplier - (C1 serie)
Tools kit
This kit contains the usefull tools to disassemble and reassemble the shaft seals in the
different flanges and flanged stators.
Specific tools
DESCRIPTION
P/N
For all pump models, kit including: 065192
Mounting mandrel 19.5 mm 065089
Protective sleeve 065088
Washer 073331
Coupling adjustment tool 065087
Extraction tool 065186
To Next Page
Loading...
