Operating instructions HE lite
Page 10 of 28 Revision 9 © 2017 – Pfeuffer GmbH
To switch off the instrument press the
button
»OFF« or wait for 30
seconds.
If the measuring cell is empty or if the
sample is too dry, the reading which was
too low or too high, e.g. »< 9 %«
depending on the selected calibration,
appears on the display.
Product and measuring ranges:
Wheat .................... 9 bis 35 %
Rye ......................... 9 bis 35 %
Barley .................... 7 bis 38 %
Oats ....................... 8 bis 35 %
Rape ...................... 4 bis 30 %
Maize ..................... 8 bis 45 %
Sunflower .............. 5 bis 25 %
Triticale .................. 9 bis 35 %
Open the measuring cell, empty it and
clean it with a paintbrush (see following
Attention! Moist materials must be removed from the measuring cell immediately after
the measurement!
6.3 Cleaning the measuring cell
To open the measuring cell unscrew the
top unit anticlockwise.
Use the small handbrush to clean the top
unit of the measuring cell. Make sure
that the grinding disc shows downwards
when brushing off, so that no coarse
meal falls into the thread and leads to
dirt accumulations.
To Next Page
Loading...
Need help?
General
