Phanteks Eclipse Series - Hardware Installation; Motherboard Installation; Power Supply Installation; Storage Drive Installation

9x
4x
4x
The HDD Tray can
also hold a 2.5” SSD.
HARDWARE INSTALLATION
MOTHERBOARD
POWER SUPPLY
2.5” SSD
3.5” HDD
1
2
3
1.
1.
1.
2.
INSTALL THE MOTHERBOARD USING THE MOTHERBOARD SCREWS.
INSTALL THE POWER SUPPLY WITH 4X PSU SCREWS.
INSTALL THE SSD WITH 4X SSD SCREWS AND PLACE IT ON THE 4X RUBBER GROMMETS.
INSTALL THE HDD IN THE BRACKET AND PLACE IT IN THE CHASSIS.
2
1
ECLIPSE series