Phanteks Eclipse Series User Manual

ECLIPSE series
CABLE CONNECTION
With the Integrated Digital-RGB controller, you can choose from a variety of modes and color options.
The P360 / P418 Chassis supports the Phanteks Vertical GPU
bracket. It can be easily installed in the PCI slot area. Follow the
instructions that are included with the Vertical GPU bracket.
Power SW
HD
AUDIO
USB 3.0
SATA
DIGITAL-RGB CONTROL
OPTIONAL UPGRADES
CONNECT TO DIGITAL-RGB PRODUCTS
VERTICAL UPGRADE (PH-VGPUKT_02)
CONNECT TO MOTHERBOARD
CONNECT TO POWER SUPPLY
TO DIGITAL-RGB PRODUCTS
TO DIGITAL-RGB MOTHERBOARD
COMPATIBLE WITH:
Connect to compatible motherboard for
software control. See the below section:
Digital-RGB Control.
COLORS
2 SEC
MODES
SOLID
BREATHING
RADAR
SPARKLE
RAINBOW
PRESS AND HOLD THE MODE BUTTON TO TURN OFF FRONT LEDS
PRESS AND HOLD THE MODE BUTTON AGAIN TO TURN OFF ALL LEDS
SOFTWARE CONTROL: Turning o all LED’s will allow
for software control with a compatible motherboard.
The Mode & Color buttons do not function when
using Software Control.
MAXIMUM POWER: The Digital-RGB controller can
provide a maximum of 7A of power for expansion.
D-RGB Mode
D-RGB Color

Phanteks Eclipse Series Specifications

General

Case Type	Mid Tower
Fan Support Top	2 x 120mm or 2 x 140mm
Fan Support Rear	1 x 120mm
Radiator Support Rear	120mm
Maximum CPU Cooler Height	160mm
PSU Shroud	Yes
Material	Steel, Tempered Glass
Expansion Slots	7
Motherboard Support	ATX, Micro-ATX, Mini-ITX
Front Panel I/O	2 x USB 3.0, 1 x Headphone, 1 x Microphone, Reset
Side Panel Window	Tempered Glass
Fan Support Front	2 x 120mm or 2 x 140mm
Radiator Support Top	240mm or 280mm
Color	Black