Advanced – Enables you to use the multi-stop feature while
creating a route.
Auto Reroute – Enabling the Auto Reroute option will have
the software automatically calculate a new route if you go off
the calculated route.
4.7 GPS Buttons
On – Powers on the GPS hardware.
Off – Powers off the GPS hardware. To prevent unnecessary
battery drain, select this option whenever you no longer need
GPS routing.
Initialization – Resets the GPS hardware. Use this option if
the GPS has not been able to obtain current GPS satellite
data after several minutes.
GPS Info – Displays the satellites that are currently in view. A
second screen shows the current position information once a
fix has been obtained.
Set Clock – Sets the device clock using the current GPS
satellite information.
To Next Page
Loading...