PhaseOne P 45 - 4 Quick Start; This Is What It Takes to Get Started Real Quick

P - Series
Reference Manual
19
4. Quick Start
This is what it takes to get started real quick
Charge the batteries (Described earlier)
Install the focusing Screen (Described in camera
specific section later)
Consult the Camera specific section for special
cabling requirements for your solution.
Insert Battery or connect IEEE1394/FireWire (for
power)
Insert CF-Card or connect IEEE1394/FireWire (To
shoot tethered directly to the computer)
If shooting tethered Launch the Capture One
Application
Otherwise Shoot the images to CF-card, import
them using the Capture One Application
and a card-reader.
1.
2.
3.
4.
5.
6.
7.