Philips 10BDL3051T - 3.3.17.5 Advanced Features; Install Custom APK Application

10BDL3051T
30
3.3.17.3 ASCII Table
3.3.17.4 Table of keyboard shortcuts
Press these keys
To do this
Power + Volume↓
Launch Admin mode app
Power + Volume↑
Launch Quick Information app
Power + Poweru + Volume↑
+ Volume↓ + Volume↓ +
Volume↑
Enable touch function
Power + Power + Volume↓ +
Volume↓
Turn on the screen
Note:* Disabling touch function is only valid through
SICP command.
* Turning off the screen is only valid by
● SICP command or
● Settings  Display  Sleep or
● Settings > Signage Display > Schedule
 End Time
* Turning on the screen is only valid by
● Hotkey
● SICP command or
● Settings  Signage Display  Schedule 
Start Time if the screen is off.
* Mouse , touch and physical keyboard cannot
wake up the screen.
3.3.17.5 Advanced features
(1) Install custom APK
You can use file-manager apk to install it.
Please use key combination “ Power+ V_Down” to
enter “launch admin mode” page.  click all app
 launch file manager app  choose the apk to
install
PS: For the file manager app, please refer to
Appendix 17.6.
(2)Use the LED strips
Only SICP commands can control the LED
strips ON/OFF and colors.
* SICP commands for controlling Side LED
strips
* Led colors
LED Behavior
Power LED
Please wait for 3 seconds after the power is
connected.
Power-on at Android mode:
1. Power LED is amber when power is
connected.
2. Power LED is green when running power-on
logo.
3. The power LED is green in Android mode.
4. The power LED is green in Sleep mode.
In Recovery Mode (F/W upgrade or Factory