Philips 200CW8FB/00 User Manual

HUDSON 8
6
2. LCD Monitor Description
The LCD monitor will contain a main board, a power board and a key board which house the flat panel control logic,
brightness control logic and DDC.
The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips
each voltage.
Monitor Block Diagram
AC-IN
100V-240V
Power board
(
Include: ada
p
ter, inverter
)
Flat Panel and
CCFL backlight
Main Board
RS232 Connector
For white balance
adjustment in factory
mode
CCFL Drive.
Video signal, DDC
Key Board
HOST Computer

Philips 200CW8FB/00 Specifications

Picture/Display

panel size	20.1"/ 51 cm
effective viewing area	433.4 x 270.9 mm
pixel pitch	0.258 x 0.258 mm
brightness	300 cd/m²
contrast ratio (typical)	1000:1
smartcontrast ratio (dynamic)	3200:1
viewing angle	160º (H) / 160º (V)
response time (typical)	5 ms
smartresponse	2 ms (Gray to Gray)
maximum resolution	1680 x 1050 @ 75Hz
optimum resolution	1680 x 1050 @ 60Hz
video dot rate	205 MHz
horizontal scanning frequency	30 - 83 Hz
vertical scanning frequency	56 - 76 Hz

Power

consumption (on mode)	< 45 W (Typical)
consumption (economy mode)	31 W
consumption (off mode)	< 1 W
power supply	Built-in, 100-240VAC, 50/60Hz

Operating Environment

relative humidity	20% - 80%
temperature range (operation)	0°C to 40°C
temperature range (storage)	-20°C to 60°C

Connectivity

signal input	VGA (Analog), DVI-D
USB	USB 2.0 x 1
sync input	Composite Sync, Separate Sync, Sync on Green

Weight and Dimensions

box dimensions	535 x 451 x 159 mm
set dimensions	480 x 321 x 65 mm
set dimensions with stand	480 x 393 x 193 mm
product weight (+stand)	4.87 kg
weight incl. packaging	6.76 kg