Philips 200CW8FB/00 User Manual

HUDSON 8
9
3.3 Adjusting the Picture
Description of the On Screen Display
On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen
performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on
screen display interface is shown as below. In the OSD shown above users can press
buttons at the front
bezel of the monitor to move the cursor,
to confirm the choice or change.
To Lock/Unlock OSD function (User Mode)
The OSD function can be locked by pressing “MENU” button for more than 10 seconds.
Locked OSD function can be released by pressing “MENU” button for more than 10 seconds again.

Philips 200CW8FB/00 Specifications

Picture/Display

panel size	20.1"/ 51 cm
effective viewing area	433.4 x 270.9 mm
pixel pitch	0.258 x 0.258 mm
brightness	300 cd/m²
contrast ratio (typical)	1000:1
smartcontrast ratio (dynamic)	3200:1
viewing angle	160º (H) / 160º (V)
response time (typical)	5 ms
smartresponse	2 ms (Gray to Gray)
maximum resolution	1680 x 1050 @ 75Hz
optimum resolution	1680 x 1050 @ 60Hz
video dot rate	205 MHz
horizontal scanning frequency	30 - 83 Hz
vertical scanning frequency	56 - 76 Hz

Power

consumption (on mode)	< 45 W (Typical)
consumption (economy mode)	31 W
consumption (off mode)	< 1 W
power supply	Built-in, 100-240VAC, 50/60Hz

Operating Environment

relative humidity	20% - 80%
temperature range (operation)	0°C to 40°C
temperature range (storage)	-20°C to 60°C

Connectivity

signal input	VGA (Analog), DVI-D
USB	USB 2.0 x 1
sync input	Composite Sync, Separate Sync, Sync on Green

Weight and Dimensions

box dimensions	535 x 451 x 159 mm
set dimensions	480 x 321 x 65 mm
set dimensions with stand	480 x 393 x 193 mm
product weight (+stand)	4.87 kg
weight incl. packaging	6.76 kg