97
HUDSON 8
97
3.6 Power input connection
Power cord length : 1.8 M
Power cord type : 3 leads power cord with protective earth plug.
3.7 Power management
The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
Mode HSYNC VSYNC Video Power-cons. Indication Rec. time
Power-On On On active 45W typical Green LED --
Off Off Off blanked < 1 W Amber LED < 3 s
DC Power Off N/A < 1 W LED Off
3.8 VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.9 DVI- D Display identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B, DDC/CI, and
EDID V1.3
3.10 USB Plug support
Connect the upstream port of the monitor to host PC’s USB port via USB cable, then attach external device to
the downstream port of the monitor. Check if the device can work properly.
3.11 DDC/ CI Support
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with Protrait Display
Tune at least.
3.12 EDID
1
User visible strings on .inf file Philips 200CW (20inch WIDE LCD MONITOR 200CW8)
2
Manufacturer ID ( EDID data) PHL
3
Product ID, "xxxx" 4 codes MSB(byte 12): C0
LSB (byte 11): 19
4
maximum resolution 1680x1050
5
Horizontal Frequency Range 30~83 KHz
6
Vertical Frequency Range 56~76Hz
7
Monitor Name (13 characteries max.) Philips 200CW
3.13 Hot-key definition
Key Key Press Time
OSD
Timeout
EDFU
implement
Service
menu
Monitor Controls Lock OK(Menu) 6 sec (lock/unlock) 3 sec V V
Factory Mode
AUTO+OK+Power
On
Keep pressing
when power on
V
Demo mode for smart
image
Smart Image Key 3 sec (Enter/Quit) V V
DDC/CI On/OFF for VISTA MENU+DOWN 6 sec (lock/unlock) 3 sec V V
To Next Page
Loading...
