HUDSON 8
90
1. FOREWORD
This specification describes a 20.1" SXGA multi-scan color TFT LCD monitor with maximum resolution up to 1680 x
1050 /76 Hz non-interlaced. All optical characteristics (including WHITE-D, Brightness, and so on) are determined
according to panel specification after warming up approximate 30 minutes that brightness stability is optimal, and
follow strictly after panel specification.
2. PRODUCT PROFILE
This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which has an integrated tilt
base.
2.1 LCD
Priority : 1. LPL and CPT
Type : TN
+ film
Supplier offer the Panel specification.
Panel incoming specification : Follow Philips’ specification.
LPL LM201WE3-TLH2
Resolution : 1680x1050 (WSXGA+)
Outside dimensions : 459.4(H) x 296.5(V) x 16.5(D)
Pitch ( mm ) : 0.258 mm x 0.258 mm
Color pixel arrangement : RGB vertical stripes
Display surface : Hard coating(3H) & Anti-Glare treatment of the front polarizer
Color depth : 16.7 M colors
Backlight : CCFL edge light system
Active area(WxH) : 433.44 x 270.90mm
View angle (CR>10 ) : 160/160 (typ) for H/V
Contrast ratio :1000:1 (typ)
White luminance : 300 nit (typ)
Color gamut :72% (typ)
Gate IC : OK I MT3806
Source IC : Lusem LS0605D1
Response time : 5 ms (typ)
CPT CLAA201WA04
Resolution : 1680x1050 (WSXGA+)
Outside dimensions : 459.4(H) x 296.4(V) x 16.6(D)
Pitch ( mm ) : 0.258 mm x 0.258 mm
Color pixel arrangement : RGB vertical stripes
Display surface : Anti-glare, 3H
Color depth : 16.7 M colors
Backlight : CCFL, 4 tubes (top x 2/bottom x 2), edge light
Active area(WxH) : 433.44(H) x 270.9(V)
View angle (CR>10) : >=160/160 (typ) for H/V
Contrast ratio : >=1000:1 (typ)
White luminance : >=300 nit (typ)