Philips 200CW8FB/00 - Interface and Timing Specifications

91
HUDSON 8
91
Color gamut : >=72% (typ)
Gate IC : Novatek NT39615C4H-C1477A
Source IC : Novatek NT3929H-C1478A
Response time : 5 ms
2.2 Scanning frequencies
Hor. : 30 – 83 K Hz
Ver.: 56 - 76 Hz
Video dot rate:
< 165 MHz
Power input: 90-264 V AC, 50/60 ± 2 Hz
Power consumption : : 45 W typical
Functions:
(1) D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync
(2) DVI digital Panel Link TMDS inputs
2.3 Ambient temperature: 0 °C - 40°C
3. Electrical characteristics
3.1 Interface signals
1). D-Sub Analog
Input signal : Video, Hsync., Vsync
Video : 0.7 Vp-p, input impedance, 75 ohm @DC
Sync. : Separate sync TTL level , input impedance 2.2k ohm terminate
Hsync Positive/Negative
Vsync Positive/Negative
Composite sync TTL level, input impedance 2.2k ohm terminate (Positive/Negative)
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)
2). DVI-D Digital
Input signal: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+)
3). USB PLUG support
Input signal: Upstream input (V
BUS
, D+, D-, GND) via USB-B receptacle.
Output signal: Downstream output (V
BUS
, D+, D-, GND) through USB-A