241P3LY 24” Wide FHD LCD Monitor
2010/11/30 PHILIPS 7 of 33
241P3 LCD 57
General Product Specification
ʳ
1 FOREWORD
This specification describes a 24" FHD multi-scan color TFT LCD monitor with
maximum resolution up to 1920 x 1080 /60Hz non-interlaced.
All optical characteristics (including WHITE-D, Brightness, and so on) are
determined according to panel specification aPaulfter warming up approximate
30 minutes that brightness stability is optimal, and follow strictly after panel
specification.
2 PRODUCT PROFILE
This display monitor unit is a color display monitor enclosed in PHILIPS styling
cabinet which has an integrated tilt base.
EDID Header
Data for EDID & .inf file
1 User visible strings on .inf file Philips 241P3 (24inch Wide LCD MONITOR 241P3)
2 Manufacturer ID ( EDID data) PHL
3 Product ID, "xxxx" 4 codes MSB(byte 12): 08
LSB (byte 11): A4
4 maximum resolution 1920x1080
5 Horizontal Frequency Range 30~83 KHz
6 Vertical Frequency Range 56~76Hz
7 Monitor Name (13 characters max.)
241P
2.1 LCD
AUO
Type NR. : AUO M240HW01 V2
Resolution : 1920 x 1080 (FHD)
Outline dimensions : 556.0(H) x 323.2(V) x 16.35(D) mm
Pixel Pitch ( mm ) : 0.276mm x 0.276mm
Color pixel arrangement : 1920 horiz. by 1080 vert. Pixels. RGB stripe arrangement
Display surface treatment : Hard coating (3H), anti-glare treatment of the front polarizer.
Color depth : 16.7 M colors 8-bit with A-FRC, 16.777.216 colors
Backlight : CCFL
Active area (W x H) : Vertical 531.36mm x Horizontal 298.89 mm
View angle (CR>10) : >=170/160 for H/V
To Next Page
Loading...
