241P3LY 24” Wide FHD LCD Monitor
2010/11/30 PHILIPS 10 of 33
60 241P3 LCD
General Product Specification
6) S/PDIF (N/A for this model)
IEC 958 digital audio interface standard, 75 Ohm terminated
Signal level 0.5~1V
Connector type: RCA , Black color.
7) Audio in
Sensitivity 1000mVrms, the amplifier outputs full power when the
input level reaches 1000mVrms, terminated with impedance
>10k:.Interface
8) earphone
Stereo, > 50mVrms for headphone of 32:. The loudspeakers are muted
when earphone is plugged in.
3.2 Interface
3.2.1 D-Sub Cable
Length : 1.8 M +/- 50 mm
Fix with monitor when packing, with transplant pin protective cover.
Connector type : D-Sub male with DDC2B pin assignments.
Blue connector thumb-operated jack screws
Pin assignments:
PIN No. SIGNAL
1 Red
2 Green/ SOG
3 Blue
4 Sense (GND)
5 Cable Detect (GND)
6 Red GND
7 Green GND
8 Blue GND
9 DDC +3.3V or +5V
10 Logic GND
11 Sense (GND)
12 Bi-directional data
13 H/H+V sync
14 V-sync
15 Data clock
To Next Page
Loading...
