241P3LY 24” Wide FHD LCD Monitor
2010/11/30 PHILIPS 15 of 33
241P3 LCD 65
General Product Specification
3.8 VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B
capability
3.9 DVI Display identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3
3.10 USB support
Connect the upstream port of the monitor to host PC’s USB port via USB cable,
Then attach external device to the downstream port of the monitor.
Check if the device can work properly.
3.11 DDC /CI Support and Smart Manage/Control
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be
workable with
Philps SmartManage, SmartControl II, and
Protrait Display Tune at least.
3.12 Hot-key definition
˛ʳ˾˸ʳ˸˴˼ʳ˹ʳ
ˠ˘˥˜˗˜˔ˡʳˠ˼
3.13 SmartContrast
SmartContrast is a kind backlight control.
This function changes panel backlight according to the frame brightness
histogram.
At least the minimum contrast ratio has to be > typical 50K:1.
3.14 SmartImage
SmartImage Premium Menu
Level 1
Office
Photo ʳ
Movie ʳ
Game ʳ
Economy ʳ
Off ʳ Default
To Next Page
Loading...
