Philips 26PW9100D - Emergency Alert; Factory Channel Reset

EMERGENCY ALERT
1
Press
MENU
on the remote control to display
the onscreen menu.
2
Press
CURSOR
>
to scroll through the
onscreen menu until you see
Install
highlighted.
3
Press
CURSOR
>
to display the install menu
features.
4
Press
CURSOR
>
to scroll through
the
Install
features until you see
Emerg
Alert
highlighted.
5
Press
CURSOR
>
to display the Emergency
Alert options.
6
Use
CURSOR
<
or
>
to scroll through the
menu and highlight the
Low
or
Low or Low
Medium
priority
alerts.
7
Now use
CURSOR
>
to toggle between
Present
or
Present or Present
Discard
. If
Present
is selected, the
Present is selected, the Present
TV will display the alert of that priority. If
Discard
is selected, the TV will not display the alert of that
priority.
8
When finished, press
MENU
three times to
exit the menu from the TV screen.
*
Emergency Alert may not be visible if no
broadcast is received.
FACTORY CHANNEL RESET
1
Press
MENU
on the remote control to display
the onscreen menu.
2
Press
CURSOR
>
to scroll through the
onscreen menu until you see
Install
highlighted.
3
Press
CURSOR
>
to display the Install menu
features.
4
Press
CURSOR
>
to scroll through the
Install features until you see
Fact CH Reset
highlighted.
5
Press
CURSOR
>
to follow the instructions
in the menu to reset the TV.
6
When finished, press
MENU
button on the
remote control three times to exit
14
>
>
<
>
MENU
>
>
<
>
MENU
E
mergency Alert lets you display or discard emergency alerts for Low or Medium priority. This feature is
o
nly available in
Digital
mode.
mergency Alert lets you display or discard emergency alerts for Low or Medium priority. This feature is
mode.
mergency Alert lets you display or discard emergency alerts for Low or Medium priority. This feature is
F
actory Channel Reset feature lets you erase the contents of the master, user and favorite channel lists. This restores the TV
F
actory Channel Reset feature lets you erase the contents of the master, user and favorite channel lists. This restores the TV
F
to the initial state before the first Auto Program operation.
F to the initial state before the first Auto Program operation. F
This feature is only available in Digital Mode.
For inst
r
uction
s on
how to
Auto Install
the TV again
, refer to page 9.