10
Installation
General
Menu background
& Select Menu background.
é Press the cursor right.
“ Select Ye s or No to turn the Menu background on or off.
Smart surf
& Select Smart surf.
é Select 2 programmes or 9 programmes with the cursor
left/right.
Select
2 programmes if you want the 0 key to toggle
between the current and the previously selected channel.
Select
9 programmes if you want the 0 key to summon
a list of up to 9 channels which can be selected. (See Use
of the Remote Control, p. 4.)
Factory settings
This function allows you to reset most of the picture and
sound settings to their predefined factory values.
& Select Factory settings.
é Press OK to erase settings and reset them to their default
values.
NEXTVIEW provider
Most broadcasters in Europe are offering teletext pages
containing the day’s programme schedule.These pages can
be requested by switching the TV to Teletext Guide.
Some broadcasters are offering an extended programme
guide service called
NEXTVIEW.
NEXTVIEW is a new way of presenting programme schedules
and offers more features than basic teletext.With
NEXTVIEW it is possible to show for instance all the movies
or children programmes for today or the following days.
If you select
None as
NEX
TVIEW provider, the TV will
capture data from the available TV channels if they
broadcast
NEXTVIEW. Broadcaster defined menus will not
be available.
If you select a programme number of a TV channel
broadcasting
NEXTVIEW, the selected TV channel will
provide
NEXTVIEW data and additional information of its
own broadcasts as well as from other (non selected) TV
channels.
Normally you will select the
NEXTVIEW provider that
transmits most information in your language.You can make
the best selection via information from TV announcements
or from the newspapers.
Important:
In order for
NEXTVIEW to function properly, the first TV channel
from the favourite list should also broadcast the correct local
date and time via teletext. Please check at startup if the time
and date are correct in the
NEXTVIEW screen.
Remark:
Only some TV broadcasters support
NEXTVIEW.
How to make use of
NEXTVIEW, see p. 15.
Tilt adjust
Select
Tilt adjust.
Keep the cursor left/right pressed to adjust the rotation of
the picture.
OSD (On Screen Display)
& Select OSD.
é Press the cursor right to select Normal or Minimum.
Normal to activate the continuous display of the
programme number and extended display of TV channel
and programme information on screen.
Minimum to
activate the display of reduced channel information.
See Use of the Remote Control, p. 3, i On screen
information.
Note: When Subtitles is switched on, see Features, p. 15,
continuous display of the programme number is not possible.
Programme title
& Select Programme title.
é Press the cursor right to select Programme title Yes or
No.
When selected
Ye s, after the selection of a TV programme
or after pressing the i key on the remote control, a TV
channel which broadcasts teletext may transmit the name
of the TV channel or the programme title.When selected
No, the programme title will only appear after pressing the
i key, and not after the selection of a TV channel.
Teletext level 2.5
Some broadcasters offer the opportunity to see more
colours, other background colours and nicer pictures in the
teletext pages.
& Select Teletext level 2.5.
é Press the cursor right to select Teletext level 2.5 On to
take advantage of this feature.
“ Press the cursor right again to select Teletext level 2.5 Off
if you like the more neutral teletext layout.
The selection made is valid for all channels which
broadcast teletext.
Note: It may take a few seconds before teletext broadcast
switches over to Teletext level 2.5.
General
Menu background
Smart surf
Factory settings
NEXTVIEW provider
Tilt adjust
OSD
Programme title
Teletext level 2.5
Set/Change code
Setup
To Next Page
Loading...
