Philips 28PW9527 - Preparation; Optional Wireless Transmitter Module

2
Preparation
Should your remote be lost or broken you can still change some
of the basic settings with the keys on top of your TV.
• Press the V - or + key to adjust the volume.
• Press the
P - and + key to browse through the TV channels or
sources stored and to select them.
• Press the M key to summon the main menu.
Use the V - and + keys to select the menu items in the
horizontal axis.
Use the
P - and + keys to select submenu items in the vertical
axis.
Use the
M key to confirm your selection.
Note:
- Sometimes not all the menu items are visible on the screen;
Press the
P + key to reveal all items.
-
Exit lets you dismiss the menu. Select Exit and press the M key.
Keys on top of the TV
V
P
M
& Place the TV on a solid surface.
! 28PW9527: 41 kg; 32PW9527: 59 kg; 36PW9527: 79 kg !
For ventilation, leave at least 5 cm free all around the TV.
Do not place the TV on a carpet.
To prevent any unsafe situations, do not place any objects
on top of the TV. Avoid heat, direct sunlight and exposure
to rain or water. Keep mobile telephones at a safe distance
to avoid disturbances in picture and sound.
é Insert the aerial plug firmly into the aerial socket x at the
back of the TV. For best picture quality use the suppressor-
aerial cable supplied.
“ Remote control: Remove the cover of the battery
compartment.
Insert the 2 batteries supplied (Type R6-1,5V).
The batteries supplied do not contain the heavy metals mercury
and cadmium. Nevertheless in many countries exhausted
batteries may not be disposed of with your household waste.
Please check on how to dispose of exhausted batteries according
to local regulations.
Note: this remote control functions with TVs and other equipment
which use the RC6 signalling standard.
Preparation
1m
min.
‘ Insert the mains plug of the TV in the wall socket
having a mains voltage of 220V-240V.
To prevent damaging the mains (AC) cord which could
cause a fire or electric shock, do not place the TV on the
cord.
( Switch the TV on : Press the power switch A on the
front of your TV.
A green indicator on the front of the TV lights up and the
screen comes on.
If the indicator is red, press the -P+ keys on the remote
control.
The green lamp blinks every time you press a key on the remote
control.
When you switch on your set for the first time, the menu
LANGUAGE automatically appears on the screen. The
explanation appears in different languages one at a time.
Choose your own language and press the OK key on the remote
control.
Optional wireless transmitter module
Your TV has been prepared and equipped to connect a
wireless transmitter module with an integrated cable and
wireless surround sound loudspeakers. Such a kit may be
purchased at your TV retailer. (Type no:AD902W).
Select the correct type of transmitter in the Setup menu,
Speakers,Wireless transmitter, p. 9 Default 864 MHz has
been selected at the factory.
How to connect and to operate, see the appendix to this
manual, p. 23.
R6 / 1,5V
TV
Setup
Demo
Install
Exit
Picture Sound Features
2144.2 gb 07-06-2002 15:47 Pagina 2