Philips 28PW9527 - Record with Your Recorder Without EasyLink; Record with Your Recorder with EasyLink; Record with Your Recorder with NEXTVIEWLink

22
Record
To record S-VHS quality, connect an S-VHS peripheral
directly to the recorder.
Record a TV programme
& Select the programme number on your recorder.
é Set your recorder to record.
See the handbook of your recorder.
Switching programme numbers on your TV does not disturb
recording !
Record with your recorder without EasyLink
If you have connected an S-VHS recorder provided with the EasyLink
function, you can record S-VHS quality from an S-VHS peripheral
connected to the right side of the TV. (E.g. from an S-VHS camcorder.)
In TV mode, it is possible to start a direct recording of the programme
which is being displayed on the TV screen.
Press the
INSTANT ® record key, under the door of the remote
control.
Record with your recorder with EasyLink
879
0
i
0
◊
U
XqP
fh
INSTANT
yÚ
ZOOM
®
INSTANT
®
If your recorder is equipped with NEXTVIEWLink, and you tagged one or
more programmes to be recorded automatically in the
NEXTVIEW
mode, it is not necessary for the TV to be in the standby mode or
switched on for the recording to start.
Record with your recorder with
NEXTVIEWLink
Record a programme on your recorder connected
to
EXTERNAL 2 from Audio/Video equipment
connected to
EXTERNAL 1, EXTERNAL 3 or to
sockets on the right side of the TV
& Switch on the equipment.
é Select the correct external on your recorder.
“ Set your recorder to record.
You record what you are watching on the screen.
Do not switch programme numbers or do not switch off your TV
when you are recording !
The recorder switches on from standby and a message of what is
being recorded appears on the screen.
The recorder starts recording the programme you are watching.
Switching programme numbers on your TV does not disturb recording !
When recording a programme from a peripheral connected to
EXTERNAL 1, 3 or SIDE, you can not select another TV programme on
the screen.
To watch TV programmes again, press the programme number you
want to select twice.
Attention: the recording is stopped and your recorder switches to
standby.
If you switch to standby during recording of a programme from a
peripheral connected to
EXTERNAL 1, 3 or SIDE, the blinking lamp on the
front of your TV indicates that you are still recording.The blinking stops
after the recording is finished.
2144.2 gb 07-06-2002 15:47 Pagina 22