Alignments
EN 177Q529.1E LA 8.
8.4.4 Opt. No. (Option numbers)
Select this sub menu to set all options at once (expressed in
two long strings of numbers).
An option number (or “option byte”) represents a number of
different options. When you change these numbers directly,
you can set all options very quickly. All options are controlled
via eight option numbers.
When the NVM is replaced, all options will require resetting. To
be certain that the factory settings are reproduced exactly, you
must set both option number lines. You can find the correct
option numbers on a sticker inside the TV set and in Table
“Option code overview”.
Example: The options sticker gives the following option
numbers:
• 04368 00005 01066 08707
• 00000 00032 00512 00000
The first line (group 1) indicates hardware options 1 to 4, the
second line (group 2) indicates software options 5 to 8.
Every 5-digit number represents 16 bits (so the maximum value
will be 65536 if all options are set).
When all the correct options are set, the sum of the decimal
values of each Option Byte (OB) will give the option number.
See tables “Option code overview” for the options.
Diversity
Not all sets with the same Commercial Type Number (CTN)
necessarily have the same option code!
Use of Alternative BOM
An alternative BOM number usually indicates the use of an
alternative display or power supply. This results in another
display code thus in another Option code. For the power supply
there is no difference. Refer to chapter 2 “Safety Instructions,
Warnings, and Notes”.
8.4.5 Option Code Overview
Table 8-5 Option code overview
Important: after having edited the option numbers as
described above, you must press OK on the remote control
before the cursor is moved to the left!
8.5 Reset of Repaired SSB
A very important issue towards a repaired SSB from a service
repair shop, implies the reset of the NVM on the SSB.
A repaired SSB in service should get the service Set type
“00PF0000000000” and Production code “00000000000000”.
Also the virgin bit is to be set. To set all this, you can use the
ComPair tool.
CTN_alt BOM# Options Group 1 Options Group 2 Displ. (code)
32PFL7623D/10_1 57617 38153 37983 45160 10120 23840 00137 00000
136
32PFL9603D/10_1 57617 36099 38623 45160 10136 23842 00145 00000
152
32PFL9603D/10_2 57617 36099 38623 45160 10131 23842 00145 00000
147
37PFL9603D/10_1 57617 36099 38623 45160 10125 23842 00129 00000
141
42PFL7403D/10_1 24833 37125 37983 45160 10126 23840 00138 00000
142
42PFL7403D/79_1 24833 37125 37983 45165 10126 20512 00139 00000
142
42PFL7403S/60_1 24833 37125 37983 45160 10126 23840 00138 00000
142
42PFL7423D/12_1 24833 37125 38623 45160 10126 23842 00138 00000
142
42PFL7423H/12_1 25089 37125 38623 45160 10126 23974 00170 00000
142
42PFL7433D/12_1 24833 37125 38623 45160 10126 23842 00138 00000
142
42PFL7433S/60_1 24833 35077 38623 45160 10126 23842 00138 00000
142
42PFL7623D/10_1 57617 38151 37983 45160 10114 23840 00153 00000
130
42PFL9603D/10_1 57617 34051 38623 45160 10126 23842 00129 00000
142
42PFL9603H/10_1 57873 34051 37599 45160 10126 23974 00161 00000
142
42PFL9703D/10_1 57633 34051 38623 45160 10127 23842 00129 00000
143
42PFL9703D/79_1 24833 34051 38623 45165 10127 21538 00129 00000
143
47PFL7403D/10_1 24833 37125 37983 45160 10129 23840 00138 00000
145
47PFL7403D/79_1 24833 37125 38111 45165 10129 20512 00139 00000
145
47PFL7403D/79_2 24833 37125 38111 45165 10129 20512 00139 00000
145
47PFL7623D/10_1 57617 38153 37983 45160 10120 20768 00137 00000
136
47PFL9603D/10_1 57617 34051 38623 45160 10129 23842 00129 00000
145
47PFL9603D/10_2 57617 34051 38623 45160 10129 23842 00129 00000
145
47PFL9703D/10_1 57633 34051 38623 45160 10130 23842 00129 00000
146
47PFL9703D/10_2 57633 34051 38623 45160 10130 23842 00129 00000
146
47PFL9703D/79_1 24833 34051 38623 45165 10130 21538 00129 00000
146
52PFL9703D/10_1 57633 34051 38623 45160 10134 23842 00129 00000
150
To Next Page