Philips Alpha Series - One-Time PIN Code Creation; Changing Master PIN Code; Deleting User Information

11
Enter [*] twice followed by master PIN code
and conrm with [#].
Enter [*] twice followed by master PIN code
and conrm with [#].
Enter [*] twice followed by master PIN code
and conrm with [#].
Enter [*] twice followed by master PIN code
and conrm with [#].
Enter [1] to go to user settings and enter [2]
to add a one-time PIN code.
Enter [1] to go to user settings and enter [5]
to change master PIN code.
Enter [1] to go to user settings and enter [4]
to add or change master ngerprint.
Enter [1] to go to user settings and enter [6]
to delete user information.
Enter a one-time PIN code of 6 to 12
digits and conrm with [#]. Re-enter the
one-time PIN code and conrm with [#].
Once heard a voice prompt of “Succeeded",
keep pressing [*] several times until you exit
master mode.
Enter a new master PIN code and conrm
with [#]. Enter the new master PIN code
again and conrm with [#]. Once heard a
voice prompt of "succeeded", keep pressing
[*] until you nally exit master mode.
Without registered ngerprint: Enroll a
nger as a master ngerprint. Once heard a
voice prompt of "succeeded" , keep pressing
[*] until you nally exit master mode.
With registered ngerprint: Enroll a new
nger to replace the old one. Once you
heard a voice prompt of "succeeded", keep
pressing [*] until you nally exit master
mode.
Choose the information that is to be
deleted: Delete a single PIN code, press [1];
Delete a single ngeprint, press [2]; Delete
a single Keytag, press [3]; Delete all user
information, press [5], Please follow the
voice guide to delete a specic information.
Once heard a voice prompt of "succeeded",
keep pressing [*] until you nally exit
master mode.
Add a one-time PIN code Change master PIN code
Add or change matser ngerprint
Deletion of user information
2
1
1
1
1
or or or