Philips BDP2501 - BEFORE YOU START; Initial Setup Guide

EN 18
5. BEFORE YOU START
5.1. Initial Setup
After you have completed all of the connections to your TV, review the steps below.
1. Press [ (STANDBY/ON)] to Turn On the unit.
2. Turn On your TV.
3. Language setup screen will appear. Use [
] to select your language, then press [OK].
4. Automatically check for latest software Update setup screen will appear. Use [
] to select “On” or
“Off”, then press [OK].
5. Network setup screen will appear. Use [
] to select “Set up now” or “Not now”, then press [OK].
• If you select “Set up now”, refer to “Network Connection” on page 40 for further operation.
• If you select “Not now”, the Home Menu screen will appear.
Please select your language for
on-screen display.
English
Français
Español
Veuillez choisir votre langue
pour l'achage à l'écran.
Por favor, seleccione su idioma
para el menú en pantalla.
C How to Reset the OSD Language
You can reset the OSD language if you selected the wrong language.
1. Press [ (HOME)] to display the Home Menu.
2. Use [
] to select “ ”, then press [OK].
• This item is “Setup” (English) / “Instalación” (Spanish) / “Installation” (French).
• From here on, please select one of the following items you can find on screen:
3. Use [ ] to select “Preference” (English) / “Preferencias” (Spanish) / “Préférences” (French), then
press [OK].
4. Use [
] to select “Menu Language” (English) / “Menú Idioma” (Spanish) / “Langage du menu”
(French), then press [OK].
5. Use [
] to select your desired language, then press [OK].
6. If the items that were set are displayed in your desired language, then press [
(HOME)] to exit.