Philips BDP3502 - Before You Start; Finding a Viewing Video Source Input on Your TV; Initial Setup

EN 15
5. BEFORE YOU START
5.1. Finding a viewing video source input on your TV
after you have completed all of the connections to your TV, review the steps below.
1. Press [ (POWER)] to Turn On the unit.
2. Turn On your TV.
• If the TV is connected by an HDMI cable, it may take a few moments for the initial screen to appear.
5.2. Initial setup
Please follow the instructions below to complete the initial setup.
1. Language setup screen will appear. Use [ ] to select your language, then press [OK].
Please select your language for
on-screen display. If you want
to use the Voice Guide
function, please set to
“English” or “Español”.
English
Français
Español
Veuillez choisir votre langue
pour l'achage à l'écran. Si
vous voulez utiliser la fonction
Guide vocal, veuillez régler à
« English » ou « Español ».
Por favor, seleccione su idioma
para el menú en pantalla. Si
desea usar la función de Guía
por voz, ajuste “English” o
“Español” .
C How to reset the OSD language
You can reset the OSD language if you selected the wrong language.
1. Press [ (HOME)] to display the Home Menu.
2. Use [
] to select ˝ ˝, then press [OK].
• This item is ˝Setup˝ (English) / ˝Instalación˝ (Spanish) / ˝Installation˝ (French).
• From here on, please select one of the following items you can find on screen:
3. Use [ ] to select ˝Preference Setup˝ (English) / ˝Configuración de Preferencias˝ (Spanish) /
˝Configuration des préférences˝ (French), then press [OK].
4. Use [
] to select ˝Menu Language˝ (English) / ˝Menú Idioma˝ (Spanish) / ˝Langage du menu˝
(French), then press [OK].
5. Use [
] to select your desired language, then press [OK].
6. If the items that were set are displayed in your desired language, then press [
(HOME)] to exit.