Philips CD-I - Software Structure

- Mouse
Connect to one of the Joystick/Mouse ports,
located at the front of the MMC module. The ports
are numbered 1 and 2. When using one device only,
use port 1 .
Note: A joystick is not supplied.
- Memory card
Insert the Memory card in the Memory card slot,
located at the front of your MMC module with the
"THIS SIDE UP" printing on the card facing you.
Push it right in.
NEVER insert or remove the card when the MMC
module is switched on.
Memory card insertion in MMC module
1-4. Additional information
1-4-1. Software structure
1. System software
The system software provides for a user-friendly
interface and an optimised and suitable
environment for the application software. The
system software is stored in ROM. The main ROM is
located in the MMC, with extension ROMs in the
Expansion module and on the extensions boards .
1-16
www.icdia.co.uk