Philips CED232 - Select Listening Zone; Other Sound Settings

18 EN
• [ROCK]
• [CLASSIC]
• [JAZZ]
• [OPTIMAL]
• [FLAT]
• [POP]
Note
• Only when you select [USER], then you can adjust the
sound value of [BASS], [MID], and [TREBLE] .
1 Press .
» The current equalizer setting is
displayed.
2 Press or to select one of the
preset equalizer settings.
3 You can also select [USER], and then press
toconrm.
4 Then, press or to select of [BASS],
and [TREBLE].
5 Press or to adjust the values.
6 Press to exit.
Select listening zone
1 Press .
» The current zone setting is displayed.
2 Press or to select one of the
preset zone settings:
• [ALL] - all speakers are in same
volume level.
• [LEFT] - front left speaker is louder
than the rest of the speakers.
• [RIGHT] - front right speaker is louder
than the rest of the speakers.
• [FRONT] - the front speakers are
louder than the rear speakers.
3 Press toconrm.
4 Press to exit.
Other sound settings
You can adjust the front and rear speaker
balance, and the left and right speaker balance.
1 Press for 3 seconds.
» The following options are displayed.
2 Press or to select the audio settings
to be adjusted.
• [BALANCE]: 7L to 7R (L= left speaker
; R= right speaker)
• [FADE]: 7R to 7F (R= rear speaker ;
F= front speaker)