Philips CEM3000 User Manual

16
Program type: Describes the content •
of the current DAB station.
Scrolling text: Information broadcast •
by most DAB stations (may include
song titles, news, etc)
Signal Strength: Displays a meter •
illustrating the strength of the DAB
signal 0-100.
Signal Quality: Display DAB signal •
quality, from 0 to 100.
Tip
If any information above is selected, when •
you tune to another DAB station, you can
press OPTIONS/CLOCK once to display the
selected information, no need to scroll through
the list.
Weak DAB signal
Select the switch over option when DAB signal
is weak.
1 In the DAB mode, press MENU to enter
the menu options.
2 Press / repeatedly until [WEAK
DAB] is displayed.
3 Rotate to select an option.
• [WEAK MUTE]: When the DAB
signal is weak, fade out the DAB
audio and mute it until the DAB
signal is strong, then the audio will
fade in to the original volume level.
• [WEAK TO FM]: When the DAB
signal is weak, switch to the last
listened FM station. Switch back to
DAB when signal is strong.
3 Press to confirm.
The station is saved in the selected »
channel.
The preset number is displayed on the »
LCD screen.
Note
If a DAB station is already stored under a •
preset location, new DAB station assigned to
this location will overwrite the old DAB station.
DAB station presets will not overwrite FM
•
presets.
Tune to a preset station
1
Press 5+ and rotate to select the preset
number.
2 Press to confirm the selection.
Note
If the Scanned/Preset DAB station signal is •
not available at particular time/region, [No] is
displayed.
Display DAB information
On the display of DAB broadcasting, the first
line shows station name, and the second line
shows the service information for the current
station. 6 types of service information are
available.
1 Tune to a DAB station.
2 Press OPTIONS/CLOCK repeatedly to
scroll through the display information
(if available).
Multiplex name: Displays the name •
of the DAB multiplex in which the
current station is broadcast.
Multiplex info: Displays the channel •
and frequency of the current DAB
multiplex.
EN

Philips CEM3000 Specifications

Power

power supply	12V DC

Audio Output

output power (MAX)	50Wx4 channels
output power (RMS)	24Wx4 channels (4 ohms, 10% T.H.D.)

Dimensions

product dimensions	188 x 58 x 190 mm