Philips CEM3000 User Manual

21
7 Adjust sound
Adjust volume
1
Rotate clockwise/anticlockwise to
increase/decrease volume.
Mute
You can turn off the sound of your audio.
1 During play, press .
To resume sound, press •
again.
Turn DBB and subwoofer
on/off
1
Press DBB, then the current setting is
displayed:
» [DBB ON] : The Dynamic Bass Boost
(DBB) function is on.
» [DBB OFF] : The DBB function is off.
2 Press DBB again to change the DBB
setting.
3 Press and hold DBB to access subwoofer
settings:
» [SUBWOOFER ON]: The subwoofer
function is on.
» [SUBWOOFER OFF]: The subwoofer
function is off.
Search for a track on iPod/iPhone
1 Press SOURCE repeatedly to select iPod
mode.
2 Press BAND/ to browse iPod/iPhone
menu.
3 Rotate to select the artist search
mode, and press
to confirm.
4 Press DISP/ to search alphabetically.
5 Rotate to select artist, then press to
confirm.
6 Rotate to select song in current album.
7 Press to start play.
Note
You cannot control the music via iPod/iPhone •
under audio control mode.
Connect external sound
source
1
Connect the external sound source to
MP3 LINK connector with a 3.5 mm
cable.
2 Press SOURCE repeatedly until [MP3
LINK] is displayed.
3 Operate the external component
(See the instructions supplied with the
external component).
English
EN

Philips CEM3000 Specifications

Power

power supply	12V DC

Audio Output

output power (MAX)	50Wx4 channels
output power (RMS)	24Wx4 channels (4 ohms, 10% T.H.D.)

Dimensions

product dimensions	188 x 58 x 190 mm