Philips CEM3000 - Play Audio Files; Play a Disc; Play from USB

18
Play from USB
Note
Ensure that the USB device contains playable •
music.
Insert the USB device
1 Slide the USB connector cover marked
to the left.
2 Insert the USB storage device into the
USB connector.
The unit starts playing from the USB »
storage device automatically.
Remove the USB device
1 Press to turn off the unit.
2 Remove the USB storage device.
6 Play audio files
Note
Ensure that the disc or device contains playable •
files.
Play a disc
Note
You cannot play CDs encoded with copyright •
protection technologies.
You can play commercially available audio CDs
and these discs:
CD-Recordables (CD-R)•
CD-Rewritables (CD-RW)•
MP3 CDs•
WMA CDs•
Note
Ensure that the disc contains playable content. •
1 Insert a CD with the printed side facing up.
Play starts automatically. »
To pause CD play, press •
.
To resume CD play, press •
again.
To skip to the previous/next track, press •
or .
To search backward/forward rapidly in •
the current track, press and hold
or
for a few seconds.
Remove the CD
To take out the CD, press
on the front panel.
Tip
If the disc is blocked in the disc compartment, •
press and hold until the disc comes out.
EN