Philips CEM3000 User Manual

20
Control music playback on iPod/
iPhone
1 Make sure that the iPod/iPhone is
connected correctly.
2 Press SOURCE to select iPod USB mode.
3 Press repeatedly to toggle between the
two control modes:
• iPod control mode: Use the buttons/
touch screen on iPod/iPhone to
control the music.
• Audio control mode: Use the
control buttons on car audio to
control the music.
To control playback under audio control
mode:
To pause/resume play, press •
.
To skip to a track, press •
/ .
To search during play, press and •
hold
/ , then release to resume
normal play.
To navigate the menu, press •
,
rotate
to select, then press to
confirm.
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through
this unit.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin
dock connector:
Made for.
iPod nano (2nd generation)•
iPod nano (3rd generation, 4GB only)•
iPod nano (3rd generation, 8GB only)•
iPod nano (4th generation)•
iPod nano (5th generation)•
iPod classic (1st generation)•
iPod classic (2nd generation)•
iPod touch (1st generation)•
iPod touch (2nd generation)•
iPod touch (3rd generation)•
iPod video (30GB, 80GB only)•
Works with
iPhone •
iPhone 3G•
iPhone 3GS•
iPhone 4•
Connect iPod/iPhone
1 Slide the USB connector cover marked
to the left.
2 Insert USB adaptor on one end of iPod/
iPhone cable to the USB connector on
the main unit.
3 Insert the other end of the iPod/iPhone
cable to the iPod/iPhone connector.
The unit starts playing from the USB »
storage device automatically.
EN

Philips CEM3000 Specifications

Power

power supply	12V DC

Audio Output

output power (MAX)	50Wx4 channels
output power (RMS)	24Wx4 channels (4 ohms, 10% T.H.D.)

Dimensions

product dimensions	188 x 58 x 190 mm