How to use emergency power on Philips DDL173LCGBB/97?
If the battery voltage is insufficient, preventing you from opening the door from the outside, you can use a 5V power bank as an emergency power supply via the Micro USB interface. If there is a system crash and you cannot open the door, press and release the Reset button to restart the system automatically.
What to do if Philips Door locks have insufficient battery voltage and the door cannot be opened from outside?
If your Philips Door lock has insufficient battery voltage and you're unable to open it from the outside, power up the lock through the Micro USB interface using a 5V power bank as an emergency power supply. After opening the door, replace the batteries.
What to do if Philips DDL173LCGBB/97 Door locks system crash and I am unable to open the door from outside?
If the system of your Philips Door locks crashes and you can't open the door from the outside, press the Reset button and release it to allow the system to restart automatically.
Why Philips DDL173LCGBB/97 have a low battery alarm?
The Philips Door locks are indicating that the battery is low and all batteries should be replaced.
What to do if my Philips DDL173LCGBB/97 trigger an outside forced unlock mode inside unlocking alarm?
The alarm can be turned off by a successful verification method of any type.
How to disable anti-dismantle alarm on Philips DDL173LCGBB/97 Door locks?
The anti-dismantle alarm on Philips Door locks can be turned off automatically or by any one of the successful verification methods.
What to do about abnormal latch bolt alarm on Philips DDL173LCGBB/97 Door locks?
The abnormal latch bolt alarm on Philips Door locks will be automatically turned off.
General| Product Type | Smart Door Lock |
|---|---|
| Connectivity | Bluetooth |
| Power Source | Battery |
| Brand | Philips |
| Model | DDL173LCGBB/97 |
| Category | Door locks |
| Finish | Black |
To Next Page