Philips DigiTrak XT - Specifications

Specifications
DigiTrak XT Recorder Instructions for Use 2-9
Specifications
Functional
Channels 3
Recorded amplitude resolution 10 bits
Recording Full disclosure
Download interface USB
Sample rate 175/sec maximum
Frequency response 0.05Hz to 60Hz, @-3dB
Signal verification LCD display
Event switch Press Enter
Pacemaker Detection Programmable on/off
Memory
Capacity/Recording time 256 MB up to 96 hours
512 MB up to 168 hours (7 days)
Recording type MMC
Physical
Dimensions 91.44 x 55.88 x 19.05mm
(3.60 x 2.20 x 0.75inches)
Weight with battery 70 g. (2.5 oz.)
Enclosure Molded plastic (UL 94V-2)
Operating position Any orientation
Electrical
Gain setting 0.5X, 1X, 2X
Connector 11 pin
Patient cable 5 lead
Environmental
Operating temperature 0°C to +45°C/32°F to 113°F
Non-operating temperature -10°C to +70°C/14°F to 158°F
Operating humidity 10% to 95% (non-condensing)
Non-operating humidity 5% to 95% (non-condensing)