Philips DVDR3505/37 - Analog TV Audio Settings; Analog TV Audio Selection; Analog Recording Audio Table

31EN
Recording Playback EditingIntroduction Connections
Basic Setup
Function Setup Others
31EN
1
Press [SETUP].
2
Use [K / L] to select “Required
Settings”, then press [OK].
“Required Settings” menu will appear.
3
Use [K / L] to select “TV Audio
Select”, then press [OK].
4
Use [K / L] to select “Stereo” or
“SAP”, then press [OK].
TV Audio Select
SAP
Stereo
Stereo:
Outputs main-audio.
SAP (secondary audio program):
Outputs sub-audio.
5
Press [SETUP] to exit.
Note on recording analog TV audio
• When you record an analog TV program available in
second audio or stereo, you have to select either
“Stereo” or “SAP” in “Required Settings” menu
beforehand. Refer to the following table to check an
appropriate setting.
Selected
audio
Broadcast
audio
Disc
recording
Audio
output
Stereo STEREO+SAP STEREO STEREO
STEREO STEREO STEREO
MONO+SAP MONO MONO
MONO MONO MONO
SAP STEREO+SAP SAP SAP
STEREO STEREO STEREO
MONO+SAP SAP SAP
MONO MONO MONO
TUNER SETTINGS
Selecting TV Audio (cont’d)
Analog TV
E7C40UD.indd 31E7C40UD.indd 31 2007/01/15 11:19:422007/01/15 11:19:42