Philips DVDR3505/37 - Timer Recording Setup; Timer Recording Prerequisites; Timer Recording Setup Note

39EN
Recording
Playback EditingIntroduction Connections Basic Setup Function Setup Others
39EN
TIMER RECORDING
1
Press [TIMER].
2
Use [K / L] to select a program
number, then press [OK].
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. ---
Date Start End CH Mode
3
Use [K / L] to enter the date, then
press [B].
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 --:-- --:-- E1
Date Start End CH Mode
When pressing [L] at the
current date, the date will
change as follows.
Daily
MON-SAT
JAN/01
JAN/31
MON-FRI
SAT
FRI
SUN
e.g.) January 1st
You can program the unit to record up to 8 programs
within a month in advance. Daily or weekly program
recordings are also available.
Before recording, make sure
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.
Note
• If you have not set the clock yet:
“Manual Clock Setting” menu will appear instead of
the timer programming list at step 1. Continue with
the step 4 in “Manual Clock Setting” on page 28
before setting a timer programming.
• Use [s / B] to move the cursor to the left and the
right in “Timer Programming” menu.
Instructions continue on the next page.
E7C40UD.indd 39E7C40UD.indd 39 2007/01/15 11:19:462007/01/15 11:19:46